Hunting exploded 52 Cab drawing or pubs
Thread Starter
|
Mountain Pass
Joined: Feb 2009
Posts: 173
Likes: 49
From: Louisville, KY
Hunting exploded 52 Cab drawing or pubs
I am looking for drawings that I can download of an exploded view of a 1952 Cab and the 8 ft express bed. 
I have a copy of the Body Parts Catalogue for 48 to 55 pickups. It has a lot of exploded views but no Cab or beds. Since my copy is rather dog eared and cover perty near non exsistance. Is this a single volume or do I need to look for a second volume to complete the set. It only has an exploded view of the defrosters.
I been all over Julie's site getting a few things but may have miss the cab.
Regards, Dale
Ford52F2
I have a copy of the Body Parts Catalogue for 48 to 55 pickups. It has a lot of exploded views but no Cab or beds. Since my copy is rather dog eared and cover perty near non exsistance. Is this a single volume or do I need to look for a second volume to complete the set. It only has an exploded view of the defrosters. I been all over Julie's site getting a few things but may have miss the cab.
Regards, Dale
Ford52F2
Post Fiend
Joined: May 2008
Posts: 7,641
Likes: 21
From: Poway, Ca.
As far as I know there aren't any exploded drawings of the 51/52 Cab and 8 Ft. Express Bed - at least that I can find in my pubs. But, I'll check again, and if I find something, I'll post it.
There are artists renditions in the salesmans handbook, but nothing down to the nuts and bolts.
I do have front fender drawing and hood drawing but that's about it for body work. I'll see if any of the sites like MAR-K have any and get back to you.
There are artists renditions in the salesmans handbook, but nothing down to the nuts and bolts.
I do have front fender drawing and hood drawing but that's about it for body work. I'll see if any of the sites like MAR-K have any and get back to you.
Thread Starter
|
Mountain Pass
Joined: Feb 2009
Posts: 173
Likes: 49
From: Louisville, KY
I appreciate it, I may just have to draw up an exploded bed.
Just got back from Columbus Swap meet. Bought a few things, I did see a 48 to 56 shop manual that was missing the last 15 or so pages. Two of the torn pages that goes in that section was placed/shoved into the manual, it showed a 56 cab and two types of stake beds. Didn't buy it, they wanted $100 for it and since I had most of the photo's in another book.
If I get a Ford Mustang that swap meet would be where I need to go.
If I find any drawings I'll post them
Thanks, Dale
Ford52F2
Just got back from Columbus Swap meet. Bought a few things, I did see a 48 to 56 shop manual that was missing the last 15 or so pages. Two of the torn pages that goes in that section was placed/shoved into the manual, it showed a 56 cab and two types of stake beds. Didn't buy it, they wanted $100 for it and since I had most of the photo's in another book.
If I get a Ford Mustang that swap meet would be where I need to go.
If I find any drawings I'll post them
Thanks, Dale
Ford52F2
Roast em' if you got 'em
Joined: Mar 2005
Posts: 22,008
Likes: 9,940
From: Rio Rancho, NM
Right click, save
Right click, save
Everytime Bob makes a posting I have to right click and save....
One of these days I'll have a complete book.....(I do own a service manual and the 52 supplement but I still love the pics adn drawings)
Thanks Bob
Bobby
Right click, save
Everytime Bob makes a posting I have to right click and save....
One of these days I'll have a complete book.....(I do own a service manual and the 52 supplement but I still love the pics adn drawings)
Thanks Bob
Bobby
Thread
Thread Starter
Forum
Replies
Last Post
jimbob21rc
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Jan 30, 2008 12:42 PM
f100guy
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
4
Apr 12, 2007 09:25 PM
Mollie
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
0
May 19, 2004 10:46 AM
