When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ohio ford farm; if you don't use galvanized lines, what do you use? Right now the shut off is whatever it was from the factory. I wanted to use it a while before tinkering with it. If it would ever fricken warm up around here I can do the rubber pads and fix my air lines. Gotta love wisconsin winters!
I am looking for a Air Compressor mostly to run 1/2 drive impact wrench, 3/8 drive inpact wrench, 3/8 drive air ratchet, 1/4 drive ratchet, and air drill. I may use maybe once a month twice or three times a month at the most. I looked at a Husky 2.0 Running HP 30 Gallon Vertical Compressor Model # VT6315 Offers 135 PSI maximum pressure and air delivery 6.5/5.5 SCFM @ 40/90 PSI. Question is it says it can run at 120 Volts (Factor Wired houshold plug) But also says motor can be rewired to run off 240 Volts. What would be the difference in compressor preformance between the 2 Voltages. Please post all replys to me at email - dispatch@fryoux.com if possible.
I am looking for a Air Compressor mostly to run 1/2 drive impact wrench, 3/8 drive inpact wrench, 3/8 drive air ratchet, 1/4 drive ratchet, and air drill. I may use maybe once a month twice or three times a month at the most. I looked at a Husky 2.0 Running HP 30 Gallon Vertical Compressor Model # VT6315 Offers 135 PSI maximum pressure and air delivery 6.5/5.5 SCFM @ 40/90 PSI. Question is it says it can run at 120 Volts (Factor Wired houshold plug) But also says motor can be rewired to run off 240 Volts. What would be the difference in compressor preformance between the 2 Voltages. Please post all replys to me at email - dispatch@fryoux.com if possible.