AC Delete Pulley

Reply Subscribe

Thread Tools

Search this Thread

Aug 11, 2009 | 12:27 PM

linckeil

Thread Starter

Tuned

Joined: Aug 2004

Posts: 269

Likes: 0

AC Delete Pulley

my 1996 F350 with 351 has AC. i want to remove it. my brother has a 1996 f250 with 351 and no AC. his idler pulley to replace my AC pump will fit my setup. will an idler pulley off a 300, 302 or 460 work for me too? thanks.

Aug 11, 2009 | 12:55 PM

xpl0sive

Tuned

Joined: Feb 2009

Posts: 290

Likes: 17

one off a 302 should work, not sure about the others

Aug 12, 2009 | 06:58 AM

linckeil

Thread Starter

Tuned

Joined: Aug 2004

Posts: 269

Likes: 0

i found a guy parting out a non-AC 1993 F150 with the 4.9. i'll get the heater box and in cab heater controls from him. If the idler pulley is the same, i'll grab that too, but i have a feeling that may be different.

any other non-AC componenets I would need from this truck other than heater box, controls, and possibly the idler pulley?

Aug 13, 2009 | 09:47 AM

linckeil

Thread Starter

Tuned

Joined: Aug 2004

Posts: 269

Likes: 0

i'm heading out hopefully this weekend to pull some parts. is there anything i'm going to need from under the dash, or just the heater box in the engine compartment?

Aug 13, 2009 | 03:40 PM

stng72

New User

Joined: Aug 2009

Posts: 4

Likes: 0

I used to work at a small auto parts place and we had a/c idle pulleys for most ford trucks. The company that made them is either Doorman or motormite.