Mallory YC distributor, need cap
Thread Starter
|
Freshman User
Joined: Dec 2004
Posts: 39
Likes: 0
From: Santa Rosa, CA.
Mallory YC distributor, need cap
Hi All,
I picked up a unused Mallory YC deul point distributor for Y-blocks. Problem is it was damaged in shipping and the cap was chipped. Does anyone have a source to get a new cap or know of a replacement cap out there that would work? I've checked ebay and found a cap, rotor, and points but they want $99.00. any help or ideas whould be great.
Thanks,
Tom
I picked up a unused Mallory YC deul point distributor for Y-blocks. Problem is it was damaged in shipping and the cap was chipped. Does anyone have a source to get a new cap or know of a replacement cap out there that would work? I've checked ebay and found a cap, rotor, and points but they want $99.00. any help or ideas whould be great.
Thanks,
Tom
Posting Guru
Joined: Oct 2005
Posts: 1,017
Likes: 3
From: Longwood, Fl
Older marine engines with points used to either have Mallory or Prestolite distributors. I dont remember what the Mallory letters were, but they did use a side clamp method. Just a wild guess, but maybe one possibility, check at a marine place. Problem is it may not be any cheeper. This may not be of any help, but maybe----------.
Thread
Thread Starter
Forum
Replies
Last Post
Scotty's 52 F3
1948 - 1956 F1, F100 & Larger F-Series Trucks
14
Dec 17, 2015 11:00 PM
AJHEATING
Ford Inline Six, 200, 250, 4.9L / 300
10
Jul 26, 2007 06:34 PM
97F250LD4X
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
1
Sep 27, 2006 11:27 PM
