Hey guys just wanted to know if anyone has ever installed Auto Meter Oil pressure and Water Temp Gauges in the 5.4L. The truck Im going to do this on is a 2000 Expedition 5.4L where would the sending units go on the engine?
On my V10 I installed the sending units on the back of the engine block and dont know if it would be the same with the 5.4?
Thanks ~Gage~

 

Hope this helps, I have 2001 f150 with a 5.4, on the oil pressure I put a tee fitting where the oil pressure switch is on the oil filter adaptor. On the water temp, I put a tee fitting in the upper heater hose. Works great.

 

Thanks for the info okgearhead, I will check it out next time I change my oil.
~Gage~