I'm in the market for a new fan shroud. Mine is pretty busted up.

As most of you can tell, I've got a 351, which wasnt ever used in the trucks. So what I have is the original 302 fan shroud. Being that the 302 is shorter, the shroud sits lower.

So, what I'm getting at is, did the FE trucks have a fan shroud shape that could possibly work with my 351? Or does anyone have any ideas of what else might work?

 

I've got a dentside fan shroud that I pulled off a parts truck that I plan to put on my bumpside. I haven't actually tried to bolt it up yet, but it sure looks like it should work.

 

Why not upgrade to a Lincoln Mark Viii e-fan?... integral shroud and its massive diameter will suck a cat flat to the grill.

 

Hio has a good point. Is this the one you have now? (borrowed from DC web site)

• Fan Shroud (#D3ta-Da)
  1969 -70
  
  
  D3TZ-8146-B
  0 Star
  
  $119.95
  See Details

 

El Jeffe: Carpenter goofed, this is the WRONG ID number for this shroud.

D3TZ-8146-B = Marked on upper left corner: D3TA-8146-CA

D3TZ-8146-C (replaced C8TZ-8146-K) .. 360/390 Fan Shroud-Use with standard/xtra cooling & A/C radiators.

Marked on upper left corner: C8TA-8146-S or D3TA-8146-DA / 1968/76 F100/350.

 

Ah. So maybe I should ask it another way. Garret, what are the engineering numbers off your existing shroud that fits?

 

I am not sure. Where would they be located on it?

 

ID engineering number located on the the upper left (drivers side) corner of the shroud.

If it's D3TA-8146-CA or D3TA-CA: 302 / If it's C8TA-8146-S or C8TA-S or D3TA-8146-DA or D3TA-DA: 360/390.

 

The only markings I can find on it are D0TA 8146. The ford oval, and Barnum Bros (something)

All on the passenger side

 

Would that be Barnum and Bailey Ringing Brothers Circus?

 

It's probably D0TA-8146-A = D0TZ-8146-A replaced by D3TZ-8146-B

1969/79 F100 & 1975/79 F150 302 .. use with standard/xtra cooling & A/C radiators.

btw: Ringling Bros. and Barnum and Bailey Circus is about to "fold the tent" for the last time.

After the few remaining 2017 engagements are finished, so will they be...out of business after 132 years.

 

I have no clue haha

I assume it was an outsourced part.

 

Thanks dummy.

So then, it's pretty much the correct shape. I suppose I may just have to order a new one when I put in my upcoming big order from NPD or DC.

 

DOTZ8146A shown at:


McDonald Obsolete Parts

Part Number DOTZ-8146-A
Seller:McDonald Obsolete Parts
Phone (812) 359-4965
Price:Request PricingEmail:Send Seller Email Inquiry
Quantity:1
Location:rockport, Indiana








D3TZ8146B shown at:


Miller Obsolete Parts

Part Number D3TZ-8146-B
Seller:Miller Obsolete Parts
Description:FAN SHROUD
Phone (607) 722-5371
Price:Request PricingEmail:Send Seller Email Inquiry
Quantity:1
Location:Binghamton, New York



Nos Parts Source *Fo

913.220.5746



xGreen Sales

(800) 543-4959





xDennis Carpenter Ford

704-786-8139