6.9l hard sart
Thread Starter
|
Junior User
Joined: Jul 2009
Posts: 65
Likes: 0
6.9l hard sart
i have a 1983 f250 with the 6.9l and a 4 speed manuel i just baught the truck and i had it running but was getting tons of white smoke. already ran a compression test all were at 400. injectors tested good. but now i cant get it to start at all i had been jumping the glow relay and it would start after that but now i jump the relay and nothing happens.
Super Moderator
Joined: Oct 2005
Posts: 24,308
Likes: 42
From: SW Virginia
Hello 6.9lidiguy and Welcome to FTE! You may not be aware but this is the forum for the 2009 F-150 so you're not likely to find an answer here. Try posting this in the Pre-Power Stroke Diesel (7.3L IDI & 6.9L) forum here:
https://www.ford-trucks.com/forums/forum117/
You'll likely get an answer there as there are a lot of knowledgeable folks there with experience regarding your engine. Good luck and again Welcome to FTE!
https://www.ford-trucks.com/forums/forum117/
You'll likely get an answer there as there are a lot of knowledgeable folks there with experience regarding your engine. Good luck and again Welcome to FTE!
Thread
Thread Starter
Forum
Replies
Last Post
RBerry9511
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
2
Jul 24, 2014 12:03 PM
RBerry9511
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
14
Mar 3, 2014 04:02 PM
6.9lidiguy
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
22
Jul 13, 2009 12:35 AM
