Leaving well enough alone?
Thread Starter
|
Freshman User
Joined: Jun 2009
Posts: 25
Likes: 0
Leaving well enough alone?
Pulled the turbo today in preperation for bellowed up-pipes coming this week including the o-ring kit from Clay. My question is....there is no sign of any leaks other than the passenger side up-pipe.....should I pull the pedestal and install the new o-rings, as well as, the other o-rings in the kit or just leave well enough alone?
Thanks for any/all advice!
Thanks for any/all advice!
Posting Guru
Joined: May 2007
Posts: 1,967
Likes: 0
From: Bowling Green, Kentucky
I would if I was you, as said its just for more bolts. Also I would use the blue locktight on the bolts when you torque them back down. If its still your stock o-rings I bet they are yellow looking and starting to get hard.
Thread
Thread Starter
Forum
Replies
Last Post
Jharger
2.6, 2.8, 2.9, 4.0 & SOHC 4.0 V6
5
Jul 21, 2019 01:40 PM
F350-6
1999 - 2003 7.3L Power Stroke Diesel
36
Mar 22, 2008 11:19 PM
MuchToMyDelight
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
1
Aug 8, 2003 11:04 AM
