Replace Front Seats?
Thread Starter
|
New User
Joined: May 2009
Posts: 1
Likes: 0
Replace Front Seats?
Got an '02 diesel with bucket seats/center console. Wanna replace all that with a bench seat... and no, I don't care about the radio controls on the back of the console for the back seat (if the kids want to control the radio, they can buy their own car
). What are my options?
). What are my options?
Posting Guru
Joined: Dec 2007
Posts: 1,265
Likes: 0
From: Metro Detroit, MI.
I have heard the bench's from the 250's will fit.
I believe someone on here did the same to add the extra seat for the family trips. I can't remember the title of the thread. Sorry really no help.
I believe someone on here did the same to add the extra seat for the family trips. I can't remember the title of the thread. Sorry really no help.
Elder User
Joined: Aug 2005
Posts: 917
Likes: 1
From: Fort Lauderdale, Fl
Got an '02 diesel with bucket seats/center console. Wanna replace all that with a bench seat... and no, I don't care about the radio controls on the back of the console for the back seat (if the kids want to control the radio, they can buy their own car). What are my options?
). What are my options?I'm looking to re-upholster my front seats and if you are selling them cheaper than the quote I'll get em.
Thanks!
Cargo Master
Joined: Jan 2008
Posts: 2,566
Likes: 18
From: The Great White North!
First off, welcome to the forums, lots of great info here and the people usually match. (some great folks here)
The seats from any of the crew cabs, even single cabs, (just not the extra cabs-the ones with the suicide doors- because the seat belts are intergrated into the seats) from the 250-350 series will fit. In fact the center 20 seat will fit on its own if you remove your arm rests from the bucket seats. There were benches per say 40/20/40 split, and the full on bench seats. I have done some digging into this, just haven't done the swap as yet because it is not really pressing at this point in time, plus most wreckers only want to sell the entire seat.
The seats from any of the crew cabs, even single cabs, (just not the extra cabs-the ones with the suicide doors- because the seat belts are intergrated into the seats) from the 250-350 series will fit. In fact the center 20 seat will fit on its own if you remove your arm rests from the bucket seats. There were benches per say 40/20/40 split, and the full on bench seats. I have done some digging into this, just haven't done the swap as yet because it is not really pressing at this point in time, plus most wreckers only want to sell the entire seat.
More Turbo
Joined: Oct 2008
Posts: 657
Likes: 4
From: Pueblo, CO
klondikemike, Excellent question & welcome to the boards... I had been wondering the same thing.
wallz, good info on the center section only. Would be nice to find one by itself.
Found more on the subject here: https://www.ford-trucks.com/forums/6...ddle-seat.html
wallz, good info on the center section only. Would be nice to find one by itself.
Found more on the subject here: https://www.ford-trucks.com/forums/6...ddle-seat.html
Last edited by RMBC Freeride; May 7, 2009 at 11:03 AM. Reason: link added
Thread
Thread Starter
Forum
Replies
Last Post
ithaca1230
Excursion - King of SUVs
3
May 17, 2014 07:31 PM
Kert0307
1999 - 2016 Super Duty
3
Feb 14, 2011 11:54 AM
stunod2002
Explorer, Sport Trac, Mountaineer & Aviator
1
Jan 2, 2006 10:11 PM
