dynamat
Thread Starter
|
Posting Guru
Joined: Nov 2008
Posts: 1,637
Likes: 1
From: Lexington,Ky / Owensboro
dynamat
what sponsor has dynamat or something similiar I have a box but to get anymore Id have to drive all the way home to lexington to buy some at wholesale cost
Thread Starter
|
Posting Guru
Joined: Nov 2008
Posts: 1,637
Likes: 1
From: Lexington,Ky / Owensboro
and how much should I need to do a single cab (doors,floor, and posts)....I have done this on many cars but im not sure how much I need for this truck and where are the bad areas for vibration plus I'm tired of hearing all the rattles from my sub
Postmaster
Joined: Sep 2008
Posts: 3,220
Likes: 0
From: VA
I wouldnt use dynamat. Check ebay for sound deadening material. There was a ebay store that sold a lotta square feet of their product in a kit pretty cheap and its basically the same stuff without the brand name...
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
There are a lot of options for sound deadener. When I did my F150 single cab, it took bulk pack (36sq ft) to do the floor and roof and a door kit for the doors. It didn't do the pillers or much of the back wall. I'd say have 50sq ft handy easy.
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
I was only around Fatmat once, a kid in my MECP class did his trunk. It smelled worse than peel and seal, it could have been July in florida or a bad batch or it could just stink that bad. So far dynamat hasn't stunk in the three or so batches I've used.
Thread
Thread Starter
Forum
Replies
Last Post
gt40racing
1948 - 1956 F1, F100 & Larger F-Series Trucks
27
Mar 3, 2011 07:42 PM
