Clamp on 6637 mod

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2009 | 07:56 PM

#16

OTTOMATIC

Senior User

Joined: Dec 2003

Posts: 331

Likes: 1

From: fl

went to a Covington Diesel shop and bought a 30 degree 4" dia. made buy Walker, had to cut it a bit, but it fit perfect with no strain on intake hose for my early 99 Walker Part # 41615

http://www.walkerheavyduty.com/pdf/Elbow30.pdf

Feb 16, 2009 | 09:08 PM

#17

74baja

Elder User

Joined: Oct 2007

Posts: 672

Likes: 0

From: NJ

PVC coupling here

Feb 16, 2009 | 09:29 PM

#18

joegebff

Gone Fishin for Mark

Joined: Nov 2004

Posts: 1,354

Likes: 2

From: West of Houston

Quote:

Originally Posted by F250_

Hmmm... can't really clamp the hard plastic element neck to the tube, but you CAN make some wraps with teflon tape and really snug the two together that way.

On the other hand, you can always "Gene" it together with some of that beautiful stuff called duct tape.

Gene it together!!!!

Damn I miss me some wisdom.

Feb 16, 2009 | 09:51 PM

#19

05chop

Elder User

Joined: Aug 2007

Posts: 502

Likes: 0

Feb 16, 2009 | 11:10 PM

#20

john_from_ict

Thread Starter

Freshman User

Joined: Feb 2006

Posts: 41

Likes: 0

Initially I ran the intake tube over the filter neck but after a while they loosen up and pop off. I now use a 4 inch or so piece of 4 inch exhaust to join the two. I just want to make sure I am getting a good seal and connection and saw that some are using a T-bolt clamp around the filter neck.