When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I wouldn't wrench on it to hard trying to break it loose! You could just end up with broken rings or worse. Take a few hours and pull the heads off so you have some clue as to what the situation is.
I wouldn't wrench on it to hard trying to break it loose! You could just end up
with broken rings or worse. Take a few hours and pull the heads off so you
have some clue as to what the situation is.
I went and got a 460 runner off of a friend. DOVE motor. I'll swap them and tinker with the other motor on the stand. Thanks for all the tips everyone. =)
