???????????
Thread Starter
|
Senior User
Joined: Jan 2009
Posts: 154
Likes: 0
???????????
Motor is out and oil pan leak confirmed, sealed and now just looking over everything and cleaning all sensors and turbo, also goin to 4 1/2" straight pipe inot stacks, I have found 2 exhaust leaks 1 on the manifold and 1 on the up-pipe, would that cuase the engine light to come on?
Post Fiend
Joined: Feb 2007
Posts: 14,541
Likes: 2
From: Dallas-Ft. Worth
Trending Topics
Thread Starter
|
Senior User
Joined: Jan 2009
Posts: 154
Likes: 0
Yes, the pan leak, could not get it to seal, Pulled the motor to remove the pan and see what I was working with pan was jacked up, after a little abuse it eas ready for install and it did seal this time
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Senior User
Joined: Mar 2003
Posts: 397
Likes: 0
From: nova scotia, canada
something kinda doesnt sound right. you have the ability and ambition to take the engine out, and be able to run it out of the truck, but you dont have a code reader or know where to buy one.
what gives?
what gives?
Post Fiend
Joined: Feb 2007
Posts: 14,541
Likes: 2
From: Dallas-Ft. Worth
He's on Dyess AFB, TX. FULL auto-shop with pretty much any tool, and guys that work there that usually know everything. Well, any tool but Ford diesel code readers, obviously. When I was on Tyndall back in '07, I LOVED going to the auto shop. I also frequented the one on base when I was overseas. 
Senior User
Joined: Mar 2003
Posts: 397
Likes: 0
From: nova scotia, canada
that sounds freakin awesome. research a code reader or maybe someone will pipe in. then your set. its probably just a unhooked sensor or something. let us know how it goes. without a code your just left to recheck all the sensors etc.
id put it back in and see what it doe s then.
id put it back in and see what it doe s then.
Thread Starter
|
Senior User
Joined: Jan 2009
Posts: 154
Likes: 0
For one yes there is a shop on base but my truck will not fit in the shop and they charge to much for my little E-4 pay, so im doing it all at home, and no i dont have a way of running it out of the truck. Its my baby thats where the ambition comes from!!!!
