When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's possible that my searching of the site before posting ability is lacking in skill. That said I have tried to find my answer but I have only discovered contradicting information. So here goes:
I have a 2002 f250 7.3 with manual a/c. I think I have traced the heater hose back to the firewall and found no heater control valve. I have documentation that shows vacuum diagrams that disagree. it seems that I may have a vacuum hose somewhere that is not closing the mixing gate and allowing hot air to mix when I have the dial set to all cold. Before I jump right to tearing into one assy I was trying to locate all the components.
Am I missing something? Is the control valve on the cabin side of the firewall?