1967 Fairlane decoder anybody??
Thread Starter
|
Senior User
Joined: Oct 2007
Posts: 274
Likes: 0
1967 Fairlane decoder anybody??
I found a 1967 fairlane GT 
and I was wanting to run the numbers on the VIN to see exactally what all it had from the factory. It has a built to the hills 390 in it with a manual tranny and I was just curious to see if that all was half way origional. So if anybody knows where I can run the VIN #s through to see the info on it i would appreciate it. Thanks for the help!!
and I was wanting to run the numbers on the VIN to see exactally what all it had from the factory. It has a built to the hills 390 in it with a manual tranny and I was just curious to see if that all was half way origional. So if anybody knows where I can run the VIN #s through to see the info on it i would appreciate it. Thanks for the help!!
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
I found a 1967 fairlane GT and I was wanting to run the numbers on the VIN to see exactally what all it had from the factory. It has a built to the hills 390 in it with a manual tranny and I was just curious to see if that all was half way origional. So if anybody knows where I can run the VIN #s through to see the info on it i would appreciate it. Thanks for the help!!
and I was wanting to run the numbers on the VIN to see exactally what all it had from the factory. It has a built to the hills 390 in it with a manual tranny and I was just curious to see if that all was half way origional. So if anybody knows where I can run the VIN #s through to see the info on it i would appreciate it. Thanks for the help!!I need the codes off the Warranty Plate, because...
The VIN does not include the BODY / COLOR / TRIM (Upholstery) / DATE (of production) / DSO (where vehicle was ordered from) / AXLE / TRANS, codes.
The Warranty Plate is located on the left door face below the latch.
Example of a 1967 Fairlane VIN: 7K42S123456: 7 = 1967 / K = Kansas City Assembly Plant / 42 = 500 GT 2 dr HT / S = 390 4V / 123456 = Numerical Sequence of Assembly.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
You are in NE, and cars/trucks sold new there were assembled in KC.
You also said it's a GT with a 390 engine. I figured it was prolly a GT HT, as very few convertibles were made.
I also have the production figures.
1967 Fairlane GT HT: 18,670
1967 Fairlane GT Convertible: 2,117.
I'll decode the info within a few minutes.
Trending Topics
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
7 = 1967
K = Kansas City Assembly Plant
42 = 500 XL GT 2 Door HT
S = 390 4V
194330 = Numerical Sequence of Assembly
63D = Fairlane 500XL GT 2 Door HT
M = Wimbledon White
8A = Charcoal Black Crinkle Vinyl & Charcoal Black Rosette Pattern Vinyl
05D = Assembled May 5th, 1967
54 = Omaha NE Ford District Sales (Zone) Office, where the original selling dealer ordered the car from.
D1 = You have two codes as one.
D = Ford 9" / 3.25-1 / Limited Slip
1 = You sure this is a 1?
1 = Ford 3 Speed Manual all Syncromesh Transmission.
5 is a toploader 4 speed.
btw: If this had been a 1967 F100/350, I coulda decoded all the info in less than 3 minutes, as I have most of the codes memorized. Cars take longer, cuz I have to look everything up.
K = Kansas City Assembly Plant
42 = 500 XL GT 2 Door HT
S = 390 4V
194330 = Numerical Sequence of Assembly
63D = Fairlane 500XL GT 2 Door HT
M = Wimbledon White
8A = Charcoal Black Crinkle Vinyl & Charcoal Black Rosette Pattern Vinyl
05D = Assembled May 5th, 1967
54 = Omaha NE Ford District Sales (Zone) Office, where the original selling dealer ordered the car from.
D1 = You have two codes as one.
D = Ford 9" / 3.25-1 / Limited Slip
1 = You sure this is a 1?
1 = Ford 3 Speed Manual all Syncromesh Transmission.
5 is a toploader 4 speed.
btw: If this had been a 1967 F100/350, I coulda decoded all the info in less than 3 minutes, as I have most of the codes memorized. Cars take longer, cuz I have to look everything up.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Senior User
Joined: Oct 2007
Posts: 274
Likes: 0
wow...thanks!! thats awesome!!! Yeah i am sure it is a 1. I will have pics as soon as I get my cash rounded up because it is in BFE!! I HOPEFULLY will have it within 3 weeks depending when I get concrete in my shop. I am really excited about it and cant wait to get it home. The seats are in OK shape black bucket seats and it has traction bars in the trunk and I gess the motor is a FRESH bored 60 over 390. Thanks NUMBERDUMMY!
Post Fiend
Joined: Jan 2006
Posts: 5,037
Likes: 9
From: Kasson, Minnesota
That sounds like a really cool car. I have always liked the Fairlanes and Galaxies even though I have never owned one. And yes, Bill is great at having the info that normally you can't get and then some.
