Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   Nebraska Chapter (https://www.ford-trucks.com/forums/forum176/)
-   -   1967 Fairlane decoder anybody?? (https://www.ford-trucks.com/forums/779984-1967-fairlane-decoder-anybody.html)

iwillflybyu 09-30-2008 09:56 PM

1967 Fairlane decoder anybody??
 
I found a 1967 fairlane GT :-jammin and I was wanting to run the numbers on the VIN to see exactally what all it had from the factory. It has a built to the hills 390 in it with a manual tranny and I was just curious to see if that all was half way origional. So if anybody knows where I can run the VIN #s through to see the info on it i would appreciate it. Thanks for the help!!

cornfedp 10-01-2008 05:37 AM

Send a PM to Numberdummy. You will be able to find out alot if not all the info through him.

NumberDummy 10-01-2008 06:15 AM


Originally Posted by iwillflybyu (Post 6603069)
I found a 1967 fairlane GT :-jammin and I was wanting to run the numbers on the VIN to see exactally what all it had from the factory. It has a built to the hills 390 in it with a manual tranny and I was just curious to see if that all was half way origional. So if anybody knows where I can run the VIN #s through to see the info on it i would appreciate it. Thanks for the help!!

Post or email me the VIN and all the codes off the Warranty Plate.

I need the codes off the Warranty Plate, because...

The VIN does not include the BODY / COLOR / TRIM (Upholstery) / DATE (of production) / DSO (where vehicle was ordered from) / AXLE / TRANS, codes.

The Warranty Plate is located on the left door face below the latch.

Example of a 1967 Fairlane VIN: 7K42S123456: 7 = 1967 / K = Kansas City Assembly Plant / 42 = 500 GT 2 dr HT / S = 390 4V / 123456 = Numerical Sequence of Assembly.

iwillflybyu 10-01-2008 07:37 AM

7K42S194330
63D M 8A O5D 54 D1

There, I hope that I got it right. THANK YOU!!!!

iwillflybyu 10-01-2008 07:38 AM

wow, i cant believe that you had half of the info already...thats pretty cool!!

67nukeford 10-01-2008 07:43 AM

I want to see pics of this car Anthony!! And, yes, Bill is REALLY good finding info!!!

NumberDummy 10-01-2008 08:05 AM


Originally Posted by iwillflybyu (Post 6604040)
wow, i cant believe that you had half of the info already...thats pretty cool!!

It's quite simple, really.

You are in NE, and cars/trucks sold new there were assembled in KC.

You also said it's a GT with a 390 engine. I figured it was prolly a GT HT, as very few convertibles were made.

I also have the production figures. :)

1967 Fairlane GT HT: 18,670

1967 Fairlane GT Convertible: 2,117.

I'll decode the info within a few minutes.

NumberDummy 10-01-2008 08:30 AM


Originally Posted by iwillflybyu (Post 6604038)
7K42S194330
63D M 8A O5D 54 D1 D 1

7 = 1967

K = Kansas City Assembly Plant

42 = 500 XL GT 2 Door HT

S = 390 4V

194330 = Numerical Sequence of Assembly

63D = Fairlane 500XL GT 2 Door HT

M = Wimbledon White

8A = Charcoal Black Crinkle Vinyl & Charcoal Black Rosette Pattern Vinyl

05D = Assembled May 5th, 1967

54 = Omaha NE Ford District Sales (Zone) Office, where the original selling dealer ordered the car from.

D1 = You have two codes as one.

D = Ford 9" / 3.25-1 / Limited Slip

1 = You sure this is a 1?

1 = Ford 3 Speed Manual all Syncromesh Transmission.

5 is a toploader 4 speed.

btw: If this had been a 1967 F100/350, I coulda decoded all the info in less than 3 minutes, as I have most of the codes memorized. Cars take longer, cuz I have to look everything up.

:-X22

iwillflybyu 10-01-2008 07:22 PM

wow...thanks!! thats awesome!!! Yeah i am sure it is a 1. I will have pics as soon as I get my cash rounded up because it is in BFE!! I HOPEFULLY will have it within 3 weeks depending when I get concrete in my shop. I am really excited about it and cant wait to get it home. The seats are in OK shape black bucket seats and it has traction bars in the trunk and I gess the motor is a FRESH bored 60 over 390. Thanks NUMBERDUMMY!

bucks77ford 10-01-2008 07:58 PM

That sounds like a really cool car. I have always liked the Fairlanes and Galaxies even though I have never owned one. And yes, Bill is great at having the info that normally you can't get and then some.

iwillflybyu 10-09-2008 10:48 PM

Hey Pat, I got the fairlane paid for!! Now Im just waiting for the concrete to get done in my shop so I can bring her on home!! Thats going to be a very good day when all of that happens.

cornfedp 10-10-2008 06:00 AM

Do we all need to start chanting Pics! Pics! Pics! 8D

67nukeford 10-10-2008 09:46 AM

Good point Darin....http://i246.photobucket.com/albums/g...rthless1-1.gif

iwillflybyu 10-10-2008 10:14 PM

ok, here we go, just got it home and these pics are really bad. You will have to wait until tomorrow for better ones (I hope their better)

iwillflybyu 10-10-2008 10:20 PM

http://i259.photobucket.com/albums/h...u/100_0465.jpg
http://i259.photobucket.com/albums/h...u/100_0466.jpg
http://i259.photobucket.com/albums/h...u/100_0467.jpg
http://i259.photobucket.com/albums/h...u/100_0468.jpg
http://i259.photobucket.com/albums/h...u/100_0469.jpg
:-partybud


All times are GMT -5. The time now is 07:27 AM.


© 2024 MH Sub I, LLC dba Internet Brands