Help Please!!!!! (Transmission)
Elder User
Joined: Jan 2008
Posts: 698
Likes: 0
From: Guymon
Also, You may have to clean the really good for that tab to press in. Generally they are very dirty and may have gravel inbetween the tab and connectory body,they can be hard to find and hard to push in so spray it down real good with some cleaner/degreeser. May even take a blow gun and clean it off if needed.
I say this and yours could be nice and clean already. Either way, good luck.
I say this and yours could be nice and clean already. Either way, good luck.
Lead Driver
Joined: Nov 2003
Posts: 6,900
Likes: 3
From: Campbell River, B.C.
There are some other electrical connectors to check. I've heard of other guys that have phantom problems that were traced down to a bad contact in the cluster gauge assembly. Removing it and putting it back in solved the problem in some cases. Also worth looking into is the main connector to the computer. I believe the computer is located behind the driver's side kick panel.
I think Dave might be right about the electrical issue. Its just going to take some digging to chase that gremlin out
I think Dave might be right about the electrical issue. Its just going to take some digging to chase that gremlin out
Thread
Thread Starter
Forum
Replies
Last Post
bjarnold1
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
Feb 7, 2009 12:03 AM
