pipe fitting
Thread Starter
|
Freshman User
Joined: Sep 2007
Posts: 38
Likes: 0
pipe fitting
instead of paying $300 for an exhaust system i have decided to take a cheaper route and just use a new muffler and dump it right after the muffler.
the muffler is 14" magnaflow with 2.5" I/O. the turndown is also 2.5".
my question is, how exactly do the pipes fit together, they are both 2.5" so one does not fit over the other, they just line up perfectly. how do i make this work.
the muffler is 14" magnaflow with 2.5" I/O. the turndown is also 2.5".
my question is, how exactly do the pipes fit together, they are both 2.5" so one does not fit over the other, they just line up perfectly. how do i make this work.
Thread Starter
|
Freshman User
Joined: Sep 2007
Posts: 38
Likes: 0
nvm i wasnt paying attention. it looks like the turndown has an expansion in the inlet designed to fit over standard 2.5" pipe. same as the muffler. i just have to cut the expansion off the turndown and it should fit fine
Thread
Thread Starter
Forum
Replies
Last Post
Psyclopse
1999 - 2016 Super Duty
7
Feb 4, 2012 02:35 PM
84f150guy
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
Jul 28, 2004 08:38 PM
