IDM resistor
Thread Starter
|
Posting Guru
Joined: Jan 2003
Posts: 1,412
Likes: 0
From: Munroe falls, Ohio
IDM resistor
I read about the mod and know about the danger. I read that there were several members who were sending resistors, Do any of those members still have a resistor for a 100v IDM?
If not, then at digi-key, there are several different: 75k, 1/2W, 1% metal film resistors, which one should I get?
CMF75.0KHFCT-ND
250V working, ±50ppm/°C Temp Coefficient
PPC75.0KXCT-ND
200V working, ±100ppm/°C Temp Coefficient
If its under 8oz, then the cheapest s/h would be $2.36 with first class mail.
If not, then at digi-key, there are several different: 75k, 1/2W, 1% metal film resistors, which one should I get?
CMF75.0KHFCT-ND
250V working, ±50ppm/°C Temp Coefficient
PPC75.0KXCT-ND
200V working, ±100ppm/°C Temp Coefficient
If its under 8oz, then the cheapest s/h would be $2.36 with first class mail.
Thread Starter
|
Posting Guru
Joined: Jan 2003
Posts: 1,412
Likes: 0
From: Munroe falls, Ohio
Sorry wolfe, I already knew that.
I'm asking because there are different working voltages and different temp coefficents for the same 75k 1/2W 1% resistor.
I'm also asking if any member is still giving resistor(for s/h) to other members?
I'm asking because there are different working voltages and different temp coefficents for the same 75k 1/2W 1% resistor.
I'm also asking if any member is still giving resistor(for s/h) to other members?
Thread
Thread Starter
Forum
Replies
Last Post
nlemerise
1999 - 2003 7.3L Power Stroke Diesel
8
Apr 23, 2013 11:47 PM
the_old_ranger
1994.5 - 1997 7.3L Power Stroke Diesel
1
Nov 1, 2008 08:21 PM
