Shes Done!!!!
Thread Starter
|
Senior User
Joined: Jun 2005
Posts: 495
Likes: 1
From: Somewhere in da corn,Iowa
Shes Done!!!!
sorry I haven't been on in what seems like forever guys....but my baby is finally ready to roll
, thought I would give you guys a quick run down and pics(still sitting in the garage though). She is nothing show-stopping or great, but its not a bad start, I did the body work on it, my former boss did the painting. 
Chasis:
Heidts Mustang II IFS
-widened lower control arms
-11" rotors
-Fatman springs(i dont remember the ratings..traded my 4cyl springs to a guy for them)
-rack and pinion
Stock rear end
-removed 5 leaves(still have 3)
-air shocks(for now till I get my Shockwaves)
-I believe 4.11-4.13(something close to that, not sure exactly) gears
2005 Mustang GT 17x8 'Bullitt' Wheels with Pirelli PZeros
351W V8/AOD
-est 250hp(for now)
-minor porting
-pre-70 SBF waterpump(pass. side outlet)
-Mallory HEI with Accel Super coil
-E3 plugs
-2 1/2 true duals H-piped and Flowmaster 40s
-shift kit installed by Stoddard
Body:
-filled seams
-custom re-profiled driprail
-custom mixed 'FiftyFourd Copper'
-custom tinted spray-in bedliner
-in the bed, inside of the cab and engine bay, and on the running boards, and custom tailgate treatment.
-5% VLT window tint
-flat black accents
-56 tail-lights with ford script and blue dots
-tri-bar headlights
thats all I can think of this late at night, I may be forgetting some stuff...
started from this...
coming home...
, thought I would give you guys a quick run down and pics(still sitting in the garage though). She is nothing show-stopping or great, but its not a bad start, I did the body work on it, my former boss did the painting. Chasis:
Heidts Mustang II IFS
-widened lower control arms
-11" rotors
-Fatman springs(i dont remember the ratings..traded my 4cyl springs to a guy for them)
-rack and pinion
Stock rear end
-removed 5 leaves(still have 3)
-air shocks(for now till I get my Shockwaves)
-I believe 4.11-4.13(something close to that, not sure exactly) gears
2005 Mustang GT 17x8 'Bullitt' Wheels with Pirelli PZeros
351W V8/AOD
-est 250hp(for now)
-minor porting
-pre-70 SBF waterpump(pass. side outlet)
-Mallory HEI with Accel Super coil
-E3 plugs
-2 1/2 true duals H-piped and Flowmaster 40s
-shift kit installed by Stoddard
Body:
-filled seams
-custom re-profiled driprail
-custom mixed 'FiftyFourd Copper'
-custom tinted spray-in bedliner
-in the bed, inside of the cab and engine bay, and on the running boards, and custom tailgate treatment.
-5% VLT window tint
-flat black accents
-56 tail-lights with ford script and blue dots
-tri-bar headlights
thats all I can think of this late at night, I may be forgetting some stuff...
started from this...
coming home...
Senior User
Joined: Aug 2006
Posts: 494
Likes: 2
From: AZ
Love that color!
Not to hijack, but I was thinking along the same line with the color...but all in the suede look, with a two tone Hot rod black and Copper Pearl from Hot Rod Flatz. This was kind of what I was thinking for mine (someday):
Kind of a crude rendering but it worked to get my ideas in color...
Your result is awesome! Congrats for the hard work paying off!
What is the color on yours? Kind of looks like a tangerine/copper?
Not to hijack, but I was thinking along the same line with the color...but all in the suede look, with a two tone Hot rod black and Copper Pearl from Hot Rod Flatz. This was kind of what I was thinking for mine (someday):
Kind of a crude rendering but it worked to get my ideas in color...
Your result is awesome! Congrats for the hard work paying off!
What is the color on yours? Kind of looks like a tangerine/copper?
Cargo Master
Joined: Apr 2007
Posts: 2,063
Likes: 38
From: Valley Center, California
I'd like to see some more pics but from what I can see, it's tasteful and clean. Veeeerrrry Nice !!!
A Lady once told me that anybody can make a cheap dress with a lot of frills and lace to hide the poor work but......a classy, simple black dress is hard to make because you can't hide the mistakes.........
That's a bitchin Truck.
A Lady once told me that anybody can make a cheap dress with a lot of frills and lace to hide the poor work but......a classy, simple black dress is hard to make because you can't hide the mistakes.........
That's a bitchin Truck.
Hotshot
Joined: Nov 2000
Posts: 11,591
Likes: 14
From: Pflugerville, tx
very very nice!
Love that black grill..
| If you have to take it back to the painter for any touch up, get them to paint the bottom inside of the front fenders below the cab.
| I had them do mine after seeing this on a number of trucks in the magazines.
Sam
Love that black grill..
| If you have to take it back to the painter for any touch up, get them to paint the bottom inside of the front fenders below the cab.
| I had them do mine after seeing this on a number of trucks in the magazines.
Sam
Elder User
Joined: Jan 2007
Posts: 831
Likes: 1
From: San Antonio, Texas
Trending Topics
More Turbo
Joined: Nov 2007
Posts: 534
Likes: 8
From: Melbourne Australia
Looks Fantastic!!!!I LOVE the black grille with that color!!!I'd like to see the indicator surrounds and wheel centers in the black too!!HUGE turnaround from the blue, though!!!!Congratulations!!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
Hey Huntfamily53, This is your Official Invite to join Us in the AZ Chapter
Did your brother find a Ford yet ?
