rear end
Thread Starter
|
Elder User
Joined: Jan 2005
Posts: 507
Likes: 0
From: Alpharetta
rear end
i have an 89 f150 with 351W and C6 3 spd trans, 4x4. i'm in the process of parting it out and wanted to know which axle i have and which gears are PROBABLY in it.
Also if anyone needs anything, lemme know.
Reg cab long bed blue/silver. rebuild engine with 30k on it.
Located in Athens/Alpharetta Georgia
Keith
Also if anyone needs anything, lemme know.
Reg cab long bed blue/silver. rebuild engine with 30k on it.
Located in Athens/Alpharetta Georgia
Keith
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
You can find out exactly what axle and gears it has but looking at the axle code on the drivers door pillar and comparing it to this table...
Ford Axle Code Chart .: Articles
P.S. unless the axles have been changed that truck will have a Dana44 TTB front axle and a Ford 8.8 rear.
Ford Axle Code Chart .: Articles
P.S. unless the axles have been changed that truck will have a Dana44 TTB front axle and a Ford 8.8 rear.
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
I couldn't tell you.... it really depends on what used parts go for in your area. I know around here.. out in the country a rearend may only cost you $100 at a scrap yard, but in the city "recyclers" will probably want $600+ for it.. it's all about supply and demand and what people are willing to pay.
Thread
Thread Starter
Forum
Replies
Last Post
