When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So far (200 gallons) my truck like this fuel and the processor works well except my Grundfos pump has died this week. But so far I have some fine tuning to do once I decide what to do. The filtering of finished fuel is the biggest bottle neck my set up. I am contemplating a centrifuge to help with that.
So how is that working? Are you running on JUST the fuel you have made, or are you running a mix? If your running on just that fuel, I would like you to give me some, free of charge.
Where do I send the check for your kids college fund donation since you started? I think you see where this is going...>
TJ, looks like a killer set-up to me. So the Super Sucker is what you use to retrieve the waste oil? How does that work? I didn't see any pump on it?
I pull a vacuum on it with a 12 vacuum pump (takes 10-15 minutes, will soon be mounted on the tank) then pull up to my barrel and open the valves on the hose. Sucks a 55 gallon drum clean in a few minutes (by few I mean less than 5) then to empty I put pressure to it (10-20psi) then via a dip tube where the large hose goes in the oil is pushed out.
Originally Posted by Todd525
So how is that working? Are you running on JUST the fuel you have made, or are you running a mix? If your running on just that fuel, I would like you to give me some, free of charge.
Where do I send the check for your kids college fund donation since you started? I think you see where this is going...>
I am running it straight on what I have made other than any diesel that was in the tank when I started. I have run about 4 tanks thru straight and few mixed. The truck loves it! Sorry I don't have enough to supply my needs at this point. And I am leary of selling it. Selling it mean I am liable for damages if I mess a batch up.
Originally Posted by powerstrokeddiesel
hahaha i love it... now can you bring me one for free... lol
I will bring you one free if you send me a free check for about $2000. parts plus labor! I have another tank just like it. Bought both tanks from a guy here who up graded. he is a sheet metal fabricator so these two tanks are very nice! then after I got the tanks I added the lid and all the plumbing. I really did turn out well. I can process about 40 gallons at a time but I do about 38 gallons batches right now. Works out better in metrics.
Thats sweet TJ i like the setup! could you use a 55 gal. drum for the processor also till someone could buy a different tank? How much does your fuel cost in the end approx.? do you get your oil for free or do you buy it from a retailer?
Thats sweet TJ i like the setup! could you use a 55 gal. drum for the processor also till someone could buy a different tank? How much does your fuel cost in the end approx.? do you get your oil for free or do you buy it from a retailer?
You could use a 55 gallon drum but getting them to drain clean is an issue. You might be able to find a sheet metal shop to make a cone that you can weld on a drum.
My fuel runs about .79/gallon not including time or electricity. thats with free oil. I only have 3 sources right now. 2 are free and one I pay .20/gallon. Working on a fourth restaurant right now.
Well looking at your pics, I felt like in the years of the prohibition with the whisky (twenties) LOL. And now you can put an ad with this title: TJ´s, BIODIESEL DISTILLERY since 2008.
i guess thats rite so i guess i coul just cut the bottom out of a 5 gallon drum and basially make a large funnel. theres still alot of reading and reserch but i definatly want to do this i dont have anywhere that i can get it for froo but i know a place i can get as much as i wan for .35 a gallon.
i guess thats rite so i guess i coul just cut the bottom out of a 5 gallon drum and basially make a large funnel. theres still alot of reading and reserch but i definatly want to do this i dont have anywhere that i can get it for froo but i know a place i can get as much as i wan for .35 a gallon.
Considering the demand for oil in some area's $.35/gallon is pretty good. I know one rendering company around here is paying $.40/gallon.