P1635 Error
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 397
Likes: 0
From: San Diego
P1635 Error
Can anybody help me? My CEL is on and I pulled this code...I made the mistake of using a Hypertech programmer and the code came on soon after. I do have a stock code I saved from my SCT, would it fix it if I put it back in? any help would be appreciated! 
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 397
Likes: 0
From: San Diego
I meant stock tune file...
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 397
Likes: 0
From: San Diego
Postmaster
Joined: Aug 2006
Posts: 2,829
Likes: 3
P1635 - Tire/Axle Out of Acceptable Range
DTC indicates the tire and axle information contained in the vehicle ID (VID) block does not match the vehicle hardware. Could be caused by incorrect tire size, incorrect axle ratio, incorrect VID configuration parameters.
Sounds like a programming error in the VID block causing a conflict. Like you suspect, it could be your programmer...
DTC indicates the tire and axle information contained in the vehicle ID (VID) block does not match the vehicle hardware. Could be caused by incorrect tire size, incorrect axle ratio, incorrect VID configuration parameters.
Sounds like a programming error in the VID block causing a conflict. Like you suspect, it could be your programmer...
Posting Guru
Joined: Mar 2006
Posts: 1,798
Likes: 2
From: SoCal, SD CO. East
Look here...
Mike-
There's an old thread on this issue that might help:
https://www.ford-trucks.com/forums/5...tc-code-s.html
Brian
There's an old thread on this issue that might help:
https://www.ford-trucks.com/forums/5...tc-code-s.html
Brian
Trending Topics
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 397
Likes: 0
From: San Diego
P1635 - Tire/Axle Out of Acceptable Range
DTC indicates the tire and axle information contained in the vehicle ID (VID) block does not match the vehicle hardware. Could be caused by incorrect tire size, incorrect axle ratio, incorrect VID configuration parameters.
Sounds like a programming error in the VID block causing a conflict. Like you suspect, it could be your programmer...
DTC indicates the tire and axle information contained in the vehicle ID (VID) block does not match the vehicle hardware. Could be caused by incorrect tire size, incorrect axle ratio, incorrect VID configuration parameters.
Sounds like a programming error in the VID block causing a conflict. Like you suspect, it could be your programmer...
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Postmaster
Joined: Aug 2006
Posts: 2,829
Likes: 3
I am thinking it would be worth a shot... If you took it to a dealer the first thing they are going to do is check the parameters of the VID block and more than likely reprogram it...
The issue is strictly programming related from everything I have read...
The issue is strictly programming related from everything I have read...
Hotshot
Joined: Jul 2005
Posts: 13,834
Likes: 25
From: Middle Tn.
Sorry about the wrong info. I thought OBD 2 codes were generic but apparently they are brand specific. The 5 volt reference code is for GM and Isuzu. P1635 for Ford is indeed the tire reference dimension.
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 397
Likes: 0
From: San Diego
No problem, I saw that also..it gets confusing. I appreciate any info/help I get!
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 397
Likes: 0
From: San Diego
Fleet Mechanic
Joined: Oct 2006
Posts: 1,351
Likes: 242
From: North Florida
Mike, from reading a lot of your posts, it seems like you have had just about every programmer made and hated them all.lol. Which one did you hate the least? I'm looking to trade in my flashpaq for an SCT, is that a good move?
Posting Guru
Joined: Mar 2006
Posts: 1,798
Likes: 2
From: SoCal, SD CO. East
elee3- My SCMT1704 upgraded to the same tune level as an 1804 FlashPaq wasn't nearly as impressive and functional as my X3, IMHO...
Thread Starter
|
Senior User
Joined: Mar 2004
Posts: 397
Likes: 0
From: San Diego
With the right tunes the SCT would be my choice, I have tunes from Spartan but he refuses to send me the new ones. And I have tunes from Innovative, Eric has been great!, very responsive..I'm searching for the elusive mileage gain and I just can't find it. Eric's Gen Econ tunes is a great daily tune but I didn't see any mpg increase, so I tried the Hypertech..what a mistake!
