engine support beam
Thread Starter
|
Senior User
Joined: Feb 2005
Posts: 375
Likes: 0
engine support beam
<TABLE cellSpacing=0 cellPadding=4 width="100%" border=0><TBODY><TR><TD class=alt2 style="BORDER-RIGHT: 1px inset; BORDER-TOP: 1px inset; BORDER-LEFT: 1px inset; BORDER-BOTTOM: 1px inset">
</TD></TR></TBODY></TABLE>Would you recommend a engine support beam at northerntool.com
http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200309403_200309403&issearch=144843
</TD></TR></TBODY></TABLE>Would you recommend a engine support beam at northerntool.com
http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200309403_200309403&issearch=144843
pedant
Joined: Jan 2008
Posts: 23,576
Likes: 39
From: EXTREME southwest CT
Originally Posted by PupnDuck
To do what?
How often do you need to unbolt your motor mounts and lift your engine up to work on something?
How often do you need to unbolt your motor mounts and lift your engine up to work on something?
Post Fiend
Joined: Oct 2003
Posts: 6,214
Likes: 13
From: New Jersey
I have one of those with a crank at one end "to allow balancing the powertrain on the engine crane".
Honestly, I don't use it very much as I have a large hook on my engine crane therefore I can loop more than two chains - by using three or four chains I can adjust the lengths appropriately to get a specific angle when pulling or installing, and for me that works just fine.
Honestly, I don't use it very much as I have a large hook on my engine crane therefore I can loop more than two chains - by using three or four chains I can adjust the lengths appropriately to get a specific angle when pulling or installing, and for me that works just fine.
pedant
Joined: Jan 2008
Posts: 23,576
Likes: 39
From: EXTREME southwest CT
No Frederic, This is more like a gantry that sets just inside the hood recess on the fenders at either side of the engine bay. You can 'hold' the engine up off the crossmember and remove the motor mounts, ect.. while the engine "levitates"
Postmaster
Joined: Aug 2003
Posts: 2,873
Likes: 0
From: St. Peter
At work we have an OTC one and an ATD one. I've never personally used the OTC, but the ATD works well. I would recommend the ATD one over the northern tool one just for the fact that the ATD one has more adjustments to it. It appears that the northern tool one is limited to where you can hook the motor. Its model number is ATD-7477
Trending Topics
pedant
Joined: Jan 2008
Posts: 23,576
Likes: 39
From: EXTREME southwest CT
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Post Fiend
Joined: Oct 2003
Posts: 6,214
Likes: 13
From: New Jersey
Originally Posted by ArdWrknTrk
No Frederic, This is more like a gantry that sets just inside the hood recess on the fenders at either side of the engine bay. You can 'hold' the engine up off the crossmember and remove the motor mounts, ect.. while the engine "levitates"
Well, that I don't have so I recind my comments
Cargo Master
Joined: Apr 2001
Posts: 2,220
Likes: 26
We use a very basic one on FWD cars, and it beats working around a crane or holding up an engine with a floor jack.
"Well, to change the timing belt in a LOT of foreign cars for one....."
Or remove the crossmember, or pull the transmission...
"Well, to change the timing belt in a LOT of foreign cars for one....."
Or remove the crossmember, or pull the transmission...
Postmaster
Joined: Aug 2003
Posts: 2,873
Likes: 0
From: St. Peter
Originally Posted by ArdWrknTrk
Posting Guru
Joined: Feb 2004
Posts: 1,388
Likes: 0
From: Saratoga, NY
Originally Posted by ArdWrknTrk
Well, to change the timing belt in a LOT of foreign cars for one.....
Posting Guru
Joined: Feb 2004
Posts: 1,388
Likes: 0
From: Saratoga, NY
Originally Posted by ArdWrknTrk
Not if it's up on a lift.....
Elder User
Joined: Feb 2006
Posts: 691
Likes: 0
From: Eau Claire, WI
I've done 2 fwd transmissions, and helped with a 3rd clutch replacement (1 escort 2 saturns)
Both were a PIA, but we supported the engine with a 2x4 across the fenders with a pair of ratchet straps holding the engine up...
I dont see a reason for that support, even on the saturns plastic fenders it didnt scratch anything either time... No problem on the scort either.
Waste of money imho, but whatever, it's your money
~Nate
Both were a PIA, but we supported the engine with a 2x4 across the fenders with a pair of ratchet straps holding the engine up...
I dont see a reason for that support, even on the saturns plastic fenders it didnt scratch anything either time... No problem on the scort either.
Waste of money imho, but whatever, it's your money
~Nate
