diagram help needed
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 143
Likes: 0
diagram help needed
I have an 86 F350 Dually with a 7.5 ltr 460 carb engine (03/86) man date.
One of the exhaust valves had a chip thus it missed so I removed Both heads and had them redone and am finally done putting it back together with the exception of the accessories (AC Compressor, Power Steering Pump, Alternator etc)
I had such a hard on to get the heads off and figured I would get them back before I forgot how to put it back together but I forgot since 5 weeks went by. Anyway the alldata information I have doesn't show how the assembly goes back together with the brackets I have on the AC / Power Steering side so I figured someone here can bail me out. Any help would be greatly appreciated.
I've checked the Chilton / Haynes manuals but most of the pics are of the 302 and 351 not the 460.
Thanks
One of the exhaust valves had a chip thus it missed so I removed Both heads and had them redone and am finally done putting it back together with the exception of the accessories (AC Compressor, Power Steering Pump, Alternator etc)
I had such a hard on to get the heads off and figured I would get them back before I forgot how to put it back together but I forgot since 5 weeks went by. Anyway the alldata information I have doesn't show how the assembly goes back together with the brackets I have on the AC / Power Steering side so I figured someone here can bail me out. Any help would be greatly appreciated.
I've checked the Chilton / Haynes manuals but most of the pics are of the 302 and 351 not the 460.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
LeftyFencerRyan
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
11
Jul 8, 2007 09:52 AM
