Going in to replace GP's, anything else?
Elder User
Joined: Jun 2007
Posts: 853
Likes: 1
Ive been tying off and on all winter.To say I'm ready would be a huge understatement.I'm like a kid waiting for x-mas.By the way If anyone wants to win a bet.Bet it will snow in the Catskills on April 1st.It does,no fail,ever opening day.It snows,I freeze,and usually catch nothing that day.But still on of my favorite days of the year.
The clips are $25 dollars.I used to have an extra set but gave them to anouther member.Sorry.seems a bit mutch for a crappy little plastic clip.
The clips are $25 dollars.I used to have an extra set but gave them to anouther member.Sorry.seems a bit mutch for a crappy little plastic clip.
Elder User
Joined: Aug 2006
Posts: 870
Likes: 0
From: Mountaintop, PA
Bruce good to hear, I did no tying all winter. The desk has more dust on it than I want to mention. Ok, I have an update with my wire harness. Hears what I did on the two wires that on the pass side that ohmed high. I ohmed from one end to the other and found the resistance in the ground side for each injector wire injector that ohmed high. The ground wire for the #7 and #1 injector ohmed at 4 ohms respectivaley, compared to all the other wires under the valve cover that ohmed at .03. Talk about relief, I thought it would be the injectors for a second. So it looks like I am replacing a wire harness.
Is IH a good place to get one or ford?
Is IH a good place to get one or ford?
Elder User
Joined: Jun 2007
Posts: 853
Likes: 1
boy was I off on the price.Here is some i found on the net.Never used the store so I dont know anything about them.http://k-mansparts.com/items/ford-di...884-detail.htm
Thread
Thread Starter
Forum
Replies
Last Post
captgann
1994.5 - 1997 7.3L Power Stroke Diesel
4
Dec 16, 2010 10:38 PM
Brrumby
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
22
Mar 24, 2004 09:48 AM
