vibration while turning
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
Originally Posted by krewat
With the wheels straight ahead, reach around back of the front wheels and turn the u-joint by hand. It should spin not-too-easily, but nice and smooth.
If the needle bearings are bad, the axle will lockup to the wheel bearing/hub and turn with the wheels, giving the feeling that the hubs are locked.
If the needle bearings are bad, the axle will lockup to the wheel bearing/hub and turn with the wheels, giving the feeling that the hubs are locked.
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
Just saw this in the 150 section. Maybe RadRick is on to something here. I would have never guessed it. https://www.ford-trucks.com/forums/6...hard-turn.html
Thread
Thread Starter
Forum
Replies
Last Post
bkvanbek
6.0L Power Stroke Diesel
6
Nov 26, 2013 06:05 PM
