turbo inlet
Thread Starter
|
Junior User
Joined: Aug 2007
Posts: 66
Likes: 0
turbo inlet
I removed the air intake hose from the filter to the turbo, looks like the impellor blades are dinged up on the edges."kinda rough". Does this require immediate attention or not they have been that way along time now. How do you replace the blades and are there some better than others. on a 95 psd
Elder User
Joined: Feb 2005
Posts: 712
Likes: 0
From: Marietta, OH/Weirton, WV
Your gunna want to change it and while your at it rebuild it...the nicks and dings now make the wheel out of balance which is bad for something that spins over 100,000 RPM...someone will chime in with the link of directions on a how to. Here is the place you wanna get your parts from best bang for the buck. You can get the wheel from him too.
http://cgi.ebay.com/ebaymotors/FORD-...8658QQtcZphoto
--------------Jeremy
http://cgi.ebay.com/ebaymotors/FORD-...8658QQtcZphoto
--------------Jeremy
Thread
Thread Starter
Forum
Replies
Last Post
Bill Kay
1999 - 2003 7.3L Power Stroke Diesel
42
Feb 18, 2016 03:00 PM
