Comp Cams pushrods
Thread Starter
|
Fleet Mechanic
Joined: Jul 1999
Posts: 1,360
Likes: 1
From: Iowa
Comp Cams pushrods
Hey guys, I'm assembling a parts list for my engine. I need a Comp Cams part number for my engine. It's a 390 with a 268H Hi-Energy cam running non-adjustable rockers. I need the pn# for Comp's pushrods for this application. Their website is inconclusive in this aspect.
Senior User
Joined: Oct 2001
Posts: 306
Likes: 1
From: Hollister, CA
Comp Cams pushrods
According to the catalog I have, it lists a part number of 7833-16 for a 5/16" pushrod, ball ends, and a length of 9.620"
If your heads have been milled and your block decked during the rebuild process, the pushrod length may need to be changed. That's why a lot of people like going with the adjustable rockerarms.
Food for thought,
Reggie
If your heads have been milled and your block decked during the rebuild process, the pushrod length may need to be changed. That's why a lot of people like going with the adjustable rockerarms.
Food for thought,
Reggie
Thread
Thread Starter
Forum
Replies
Last Post
mudvillain
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
30
Apr 27, 2011 09:11 AM
maxtor
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
3
Apr 22, 2009 11:58 AM
haysr
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
Mar 23, 2004 11:35 AM
Jsbiohazard
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
3
Apr 10, 2003 07:37 PM
