Difference with long lead injector??
Thread Starter
|
Elder User
Joined: Sep 2005
Posts: 641
Likes: 1
From: Delta B.C.
Difference with long lead injector??
Hey Guys...
Trying to figure all this out.
I understand that they ran a long lead injector in the #8 cylinder to deal with some of the issues of the dead headed fuel system.
What exactly is the difference with the long lead injector? When did they run these?
I notice that alot of the regualted return systems say to
eliminate the long lead injector, is there a way to change it or does this require the replacement of the entire injector??
I ask because I am still very much considering the DIY injectors and dont understad this.
Thanks guys!!!!!!
Bob
Trying to figure all this out.
I understand that they ran a long lead injector in the #8 cylinder to deal with some of the issues of the dead headed fuel system.
What exactly is the difference with the long lead injector? When did they run these?
I notice that alot of the regualted return systems say to
eliminate the long lead injector, is there a way to change it or does this require the replacement of the entire injector??
I ask because I am still very much considering the DIY injectors and dont understad this.
Thanks guys!!!!!!
Bob
Thread Starter
|
Elder User
Joined: Sep 2005
Posts: 641
Likes: 1
From: Delta B.C.
Hmmmm... I may have answered my own question...
the long lead injector has a longer primary shot of fuel to help with the under fueling condition....
so rebuilding my injectors will take care of this....
the long lead injector has a longer primary shot of fuel to help with the under fueling condition....
so rebuilding my injectors will take care of this....
Thread
Thread Starter
Forum
Replies
Last Post
DAI532
1999 - 2003 7.3L Power Stroke Diesel
4
Sep 1, 2009 10:36 AM
