When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ok so i got the kit now in my hands so i guess its time for the rebuild! once this thing is back together are any of the bolts supposed to be torque to a specific amount?
ok the kit that i got did not come with the o-rings i circled ... i think i would like to go ahead and pick these items up do you guys buy any chance have the part number to these o-rings ... and im assuming i can get them at the local dealer ... or anywere else i can get them.
<a href="http://photobucket.com" target="_blank"><img src="http://i70.photobucket.com/albums/i94/jcortez863/rebuildkit2.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
yeah the pedestal because the kit that i purchased didnt come with them and id figure id replace them aswell
got them they came out to be 12 bucks for all four! I cleaned the parts with a rag and some brake cleaner i dont think it will damage the oily items and now i guess for the rebuild...
here is what i was talking about that looked like were it might leak from ... or am i just think to much ...
<a href="http://photobucket.com" target="_blank"><img src="http://i70.photobucket.com/albums/i94/jcortez863/DSC001692.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
some other pics of how i think everthing is supposed to go...
<a href="http://photobucket.com" target="_blank"><img src="http://i70.photobucket.com/albums/i94/jcortez863/DSC00168.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
Looks good. Be sure to lube everything up with fresh oil before you put it back together. And watch that ring seal on the exhaust side to be sure it goes in straight. Some oil on that seal will help it slide into place. It may take a little force to get it back in too.
Thanks jeremy for the help i really appreciated it ...i would like to ask another question though about the ebpv about deleting it altogether since i have everything apart and will be placing the pedestal o rings on... i made a thread on the ebpv question if u would like to comment on it aswell...
so everything was put back on and test drove...but still the white smoke remains... i dont know what it could be i mean is it the turbo or could it be something else give me some feed back people...
Here's a video of my truck and smoke !