computer chip
Thread Starter
|
Junior User
Joined: Jan 2001
Posts: 86
Likes: 0
From: Virginia Beach Good ol' U
computer chip
Hi all ,I'm new here and want to say hello and ask a few questions.I have a '93 f-150 with 5.0, E4OD tranny,I've regeared to 4.10's to offset the change on tire size to 33x12.50's.I also have the k&n filtercharger injection kit,bassini equal length headers,bassini 3" y pipe with hi-flow cat and a flow master 3" cat back and the Jacob's ultra team.I tried the jet chip about three years ago and it was junk.The 1st one lasted about a month and the 2nd one lasted about a week.Anyways I'm thinking of trying a chip again.Probably the superchip.I'd like to know what kind of gains I can expect to see with the above listed mods.I'm hoping that a chip will really enhance the mods that I currently have,because my truck still feels that it lacks power most of the time.Maybe I'm just expectig too much.Sorry so long and thanks in advance.Later,fellas.
Cleve
Cleve
Senior User
Joined: Apr 2000
Posts: 453
Likes: 0
computer chip
Cleve: The gear change most likely broke even with the tire size change. The intake, headers, and exhaust is good for maybe 10-15 hp. Sorry, that is all it shows on the dyno. A chip will gain 10% of whatever your horsepower numbers are right now. It will gain about 12-15% more torque. That year 5.0 is listed at 200hp, stock. The chip will gain 20hp and 30 ft/lb on a stock 5.0. You would see a bit better with the mods that you have made. Try it for 30 days. The chips on this site come with a 30 day SATISFACTION guarantee, and a LIFETIME product warranty.
Thanks
Danny
Thanks
Danny
Thread
Thread Starter
Forum
Replies
Last Post
