need some help
Thread Starter
|
Junior User
Joined: Jul 2004
Posts: 95
Likes: 0
need some help
While checking my oil yesterday i found my air filter box is cracked. I am getting married in less than 2 months so money is an issue but I will do what ever i have to because since trashing the motor is way more expensive. Should i replace the box with oem or go after market and what kind of prices am i looking at. Thanks in advance for any help.
2002 F-250 power stroke 4x4
2002 F-250 power stroke 4x4
Snowboard season cometh..
Joined: Jan 2006
Posts: 5,406
Likes: 1
From: Gulf Coast of Florida
Originally Posted by nlemerise
I have the airbox out of my 1999 and you can have it for shipping cost, if you can use it. The airbox is in great shape too...I replaced it a few years ago with the AIS filter and box.
Senior User
Joined: Aug 2005
Posts: 465
Likes: 0
i didnt even need the 4 inch pipe for mine i just worked the stock rubber piece over the filter. you might want to have them order you a filter because the napas around me dont stock them, it usually takes them a day.
Snowboard season cometh..
Joined: Jan 2006
Posts: 5,406
Likes: 1
From: Gulf Coast of Florida
Some people have it work just fine without the 4" pipe - personally, I had it that way but didn't trust it not to pop off and some horribly inconvenient moment. Muffler shops normally have scrap around and most (myself included) have had them just cut off a 4" long piece and give it to them (FREE!). 1 extra clamp then and you're pretty much guaranteed it won't come loose or pop off. I like reliability.
Trending Topics
Post Fiend
Joined: Feb 2007
Posts: 14,541
Likes: 2
From: Dallas-Ft. Worth
Since you have a 2002, you can slip the stock intake tube right over the 6637 filter neck. That's how I have mine -- been that way for months with no problems. It's a good idea to scuff up the neck with rough sandpaper or a file so the tube has something to grab. Other than that, the only trick is to cut the little tab off the end of the intake tube, and trim the alignment tab that fits in the slot in the clamp because of the slightly wider filter neck.
Here's mine installed:
EDIT: Oh yeah, forgot to mention that you can toss the filter minder and tape up the connector. And be careful with the intake temp sensor -- it's a little fragile, but when you pull it out, you can just zip-tie it next to the filter at a convenient point. Most of us use the brake line that's right there. If you want, you can install the sensor and/or filter minder directly into the end of the filter, but it's definitely not necessary...
Here's mine installed:
EDIT: Oh yeah, forgot to mention that you can toss the filter minder and tape up the connector. And be careful with the intake temp sensor -- it's a little fragile, but when you pull it out, you can just zip-tie it next to the filter at a convenient point. Most of us use the brake line that's right there. If you want, you can install the sensor and/or filter minder directly into the end of the filter, but it's definitely not necessary...
Last edited by Izzy351; Jun 22, 2007 at 09:57 AM.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Lead Driver
Joined: Jun 2007
Posts: 7,760
Likes: 27
From: Hampton, Maryland.
This is the exact procedure I followed last friday and I love hearing that turbo whine and the pressure release when you back of the pedal. Here is the link:
http://guzzle.rbmicro.com/filtermind.html
http://guzzle.rbmicro.com/filtermind.html
Post Fiend
Joined: Sep 2006
Posts: 5,584
Likes: 0
From: Millbrook Alabama
Originally Posted by 96f-150
I am getting married in less than 2 months so money is an issue but I will do what ever i have to because since trashing the motor is way more expensive.
2002 F-250 power stroke 4x4
2002 F-250 power stroke 4x4
Getting married is in no way fashion or form cheaper than replacing a motor.
Trust me. You think you got maintenance cost now....
hooo boy. you just wait.Congratulations, and good luck.
Fleet Owner
Joined: Jun 2004
Posts: 25,090
Likes: 1,112
From: Rio Rico, AZ.
Originally Posted by bdrummonds
Since everyone else has answered your ? I will pick on you a little bit.
Getting married is in no way fashion or form cheaper than replacing a motor. Trust me. You think you got maintenance cost now.... hooo boy. you just wait.
Congratulations, and good luck.
Getting married is in no way fashion or form cheaper than replacing a motor.
Trust me. You think you got maintenance cost now.... hooo boy. you just wait.Congratulations, and good luck.
It's very much worth the tradeoff, congrats and may God bless you with a long life together.
Posting Guru
Joined: Jul 2006
Posts: 1,346
Likes: 0
From: Visalia CA
Originally Posted by HKusp
This is the exact procedure I followed last friday and I love hearing that turbo whine and the pressure release when you back of the pedal. Here is the link:
http://guzzle.rbmicro.com/filtermind.html
http://guzzle.rbmicro.com/filtermind.html
