ECZ-C heads
Thread Starter
|
Laughing Gas
Joined: Oct 2003
Posts: 890
Likes: 0
From: New York
ECZ-C heads
I have a pair of ECZ-C heads that I plan on using for the 292 Y that I'm building. According to ford-y-block.com, these are 1956 heads, with 1.78" intake valves.
Now, a couple of questions:
First .. these are big-port heads, right? I recently bought a '57 four-barrel intake on eBay and I want to make sure it will match up. Second, can the intake valves be changed to the larger 1.92" size?
Now, a couple of questions:
First .. these are big-port heads, right? I recently bought a '57 four-barrel intake on eBay and I want to make sure it will match up. Second, can the intake valves be changed to the larger 1.92" size?
Lead Driver
Joined: Jan 2006
Posts: 8,423
Likes: 0
From: Colonsay Sk. Canada
Sounds good there is another kid bout my age who has the guts to build a Yblock, rather then do the cheap swap.
I looked at several heads, and I do have a set of the larger valve type head that have a casting number ECZ-G. The "G" head was made in 1957.
Good lookin 1960 though!!!!
I looked at several heads, and I do have a set of the larger valve type head that have a casting number ECZ-G. The "G" head was made in 1957.
Good lookin 1960 though!!!!
Thread
Thread Starter
Forum
Replies
Last Post
flipklos
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
4
Jan 14, 2012 07:23 PM
fishernut
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
15
Aug 26, 2009 12:55 PM
bigwin56f100
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
5
Aug 25, 2003 06:22 PM
