Steering stabilizer on 2wd
Mountain Pass
Joined: Apr 2002
Posts: 106
Likes: 1
From: SF Bay Area
Originally Posted by Brians97F250Crew
Cobra427, yours shipped out today. I'll email ya the tracking # tonight. Thanks 
Originally Posted by Brians97F250Crew
How you like your Superformance Cobra?
I've had it since 2001, and it continues to be a lot of fun to cruise around.Thanks again!
Thread Starter
|
Elder User
Joined: Nov 2005
Posts: 726
Likes: 1
Thread Starter
|
Elder User
Joined: Nov 2005
Posts: 726
Likes: 1
LOL .. no problem Ken. I just dropped your kit off at the P.O. a few minutes ago. Priority mail to you on the big island.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Tuned
Joined: Jan 2005
Posts: 344
Likes: 2
Thread Starter
|
Elder User
Joined: Nov 2005
Posts: 726
Likes: 1
igotoneforya ... Yes I can make another dual setup if that's what you'd like. Probably take me a week to squeeze it in but I can do it. The dual setup I made did require a little of the x-member to be ground off for clearance. Let me know if you still want a dual I might be able to reconfigure it some to do away with the x-member trim
XylemXorro .... if you'd like one the site is in my signature. There is a paypal link on the site.
All ... I just had a local fabrication shop cut out ten pieces of the brackets each and I made up a jig to speed up the process. So I should be able to get ahead hopefully this week. Thanks again for all you guys patience.
XylemXorro .... if you'd like one the site is in my signature. There is a paypal link on the site.
All ... I just had a local fabrication shop cut out ten pieces of the brackets each and I made up a jig to speed up the process. So I should be able to get ahead hopefully this week. Thanks again for all you guys patience.
