When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nice truck welcome to the chapter. We are getting enough members to really get the chapter going. If you need stuff for your truck you can get a discount at the CAP-IT in Coquitlam. Just tell them you belong to this chapter. Ask for Andy or Vince and tell them Doug sent you.
nice truck( are those the stock wheels?), nice boat (whats it got for motorvation? and where do you run it?), and welcome to teh board. where do you work in Langley?
PS its a Scab, not a Screw
Oops that is what I meant but all you ever see are super crews First off No that isn't my boat. I just hauled about 15 boats from Langley to Van for the Boat Show (I work for Galleon Marine Langley) and I saw that boat backed up to it and took the pic I do have stock rims and the truck is powered by the 3v 5.4L. I actually work downtown doing HVAC installations into hi-rises and offices AKA tin basher.
The motor is 175hp and will rocket the boat to about 60mph. It'll be done in about 6 weeks and I'll be putting her in a car show June 23 when the assembly is finished.
Hey guys, Names Pete, 21 years old, have a 2002 f350 7.3 psd.. Did Sheet metal work on aircraft for awhile, realized I'd rather be flying than fixing them.. so, going back to school in the fall to work on an aviation technology degree and be a pilot.
It would be kinda cool to have a meet one time with anyone down here in the lower mainland.
Hey pete, sounds like a sweet truck you have! We are trying to get this chapter going stronger, so a meet is definatly going to be in the making. Stick around and post