replacing injectors
Thread Starter
|
New User
Joined: Aug 2004
Posts: 16
Likes: 0
From: cincinnati
replacing injectors
another post here guys. i just posted about my fuel tank and im hearing that i could have an injector problem as well. dealer is trying to tell me if they have to replace the injector they have to break the body of the van loose and raise it up to replace the number 3 and 5 injector. any thought on this.
Salty
Salty
Fleet Owner
Joined: Jun 2004
Posts: 25,090
Likes: 1,111
From: Rio Rico, AZ.
Originally Posted by saltydawg
another post here guys. i just posted about my fuel tank and im hearing that i could have an injector problem as well. dealer is trying to tell me if they have to replace the injector they have to break the body of the van loose and raise it up to replace the number 3 and 5 injector. any thought on this.
Salty
Salty
Fleet Owner
Joined: Jun 2004
Posts: 25,090
Likes: 1,111
From: Rio Rico, AZ.
Originally Posted by saltydawg
i have an 01 e350 superduty with the 7.3...sorry bout that.
Senior User
Joined: Jun 2006
Posts: 194
Likes: 0
From: Orange County, California
If the tech removes the rocker arms that are next to those fuel injectors, they come right out. Done it many times myself. Injector #3 is the only difficult one. #5 comes out easily.
Last edited by catalinagoose; Oct 26, 2006 at 10:34 AM.
Elder User
Joined: Sep 2005
Posts: 761
Likes: 0
For cylinders 3 and 5 you can take the 4 T-20 bolts out of each injector and remove the top of the injectors to remove and install and reassemble the injector once installed. And, the published procedure is to remove the engine mount, not lift the cab.
Thread
Thread Starter
Forum
Replies
Last Post
parkland
General Diesel Discussion
6
Oct 23, 2012 09:14 PM
zobie18
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
3
Nov 5, 2005 10:02 PM
