Adding aux.trans - where do I find driveline parts?
#1
03-30-2001, 02:35 AM
Join Date: Mar 2001
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#2
03-31-2001, 04:21 PM
Senior User
Join Date: Apr 2000
Location: Ozarks
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Adding aux.trans - where do I find driveline parts?
I got a good deal on a Spicer 5831 (3-speed) auxiliary under/over transmission and am planning to put it between my 360/NP435 and Dana 70.
In general what is the availability of parts like U-joint knuckles, shifting cables, mounting brackets, and so on? Should I start looking under medium and heavy trucks in scrapyards, or can any parts be bought new from Dana? or NAPA?
Would a driveshaft shop be the first place to look for new U-joints and flanges? I'll need at least one shaft shortened anyway. Anyone who's done a project like this, please let me know... thanks.
In general what is the availability of parts like U-joint knuckles, shifting cables, mounting brackets, and so on? Should I start looking under medium and heavy trucks in scrapyards, or can any parts be bought new from Dana? or NAPA?
Would a driveshaft shop be the first place to look for new U-joints and flanges? I'll need at least one shaft shortened anyway. Anyone who's done a project like this, please let me know... thanks.
Thread
Thread Starter
Forum
Replies
Last Post