New bronco
Thread Starter
|
Post Fiend
Joined: Jan 2004
Posts: 5,377
Likes: 2
From: Elkhart IN
ah see I plan on mudding with it, just not doing the dumb stuff I did to my last 4wd, ex.. laying it on its side.......twice, misc tree incounters and what not.
Also, does anyone know what to call, or a part number for the accelorater pump spring? Its the spring that goes next to the throttle cable and pushes the accelerator rod. Mine only pushes about 1/4 of the pumps stroke.
Also, does anyone know what to call, or a part number for the accelorater pump spring? Its the spring that goes next to the throttle cable and pushes the accelerator rod. Mine only pushes about 1/4 of the pumps stroke.
Thread Starter
|
Post Fiend
Joined: Jan 2004
Posts: 5,377
Likes: 2
From: Elkhart IN
monsterbaby, is that the only other port? To get to that one requires pulling the pump and bracket, and i would be working around the fuel pump. If not ill have to work around it, just thought id ask.
Thread Starter
|
Post Fiend
Joined: Jan 2004
Posts: 5,377
Likes: 2
From: Elkhart IN
ok scatch that last post, got it all done. I mounted the gauges on the bottom left of the dash, so when i glance down i can see then. also, is 25 psi a good pressure for hot idle? 
Thread
Thread Starter
Forum
Replies
Last Post
Nsaan
1999 - 2003 7.3L Power Stroke Diesel
12
Aug 21, 2014 04:24 PM
