Squeaky Distributor?
Thread Starter
|
Junior User
Joined: Apr 2005
Posts: 76
Likes: 0
Originally Posted by go2toa
If I temporarily remove the serpentine belt and it stops squeaking, we'll know it was probably the water pump bearings going out. We shall see.
I bet if i replace the distributor it will persist. I suspect it is the gears under the distributor.
Trending Topics
Freshman User
Joined: Jun 2006
Posts: 27
Likes: 0
before you do that you might want to shoot some wd 30 down into youre distibutor you might have excessive play in the distribotor drive shaft maybe try a dab of oil dont leave any excess though inside the cap the bearings inside the distributor might be needin a little lube Its an idea that might save you some trouble!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
Thread Starter
|
Junior User
Joined: Apr 2005
Posts: 76
Likes: 0
the last couple weeks i've aggressively aimed to resolve this. I obtained/installed a new distributor shaft. I changed the oil, made sure it was topped off, included slick 50.
still sqealing, albeit less.
I pulled the shaft and added grease to the gears. That reduced the squealing another 20%. i know it sounds like i'm throwing away good money and too some extent i probably am, but keep in mind, the squeak is just as prevalent with the belt off!
when the engine is hot and idling, it makes no squeak whatsoever. i'm hoping the slick 50 works its way in there and eventually helps. based on what i've researched, the gear drive is less likely to cause this -- people say bushings that the shaft spin in are supposed to be honed to preclude this.
still sqealing, albeit less.
I pulled the shaft and added grease to the gears. That reduced the squealing another 20%. i know it sounds like i'm throwing away good money and too some extent i probably am, but keep in mind, the squeak is just as prevalent with the belt off!
when the engine is hot and idling, it makes no squeak whatsoever. i'm hoping the slick 50 works its way in there and eventually helps. based on what i've researched, the gear drive is less likely to cause this -- people say bushings that the shaft spin in are supposed to be honed to preclude this.
Last edited by go2toa; Aug 12, 2006 at 10:08 PM. Reason: added clarity
Thread
Thread Starter
Forum
Replies
Last Post
twinkielk15
1987 - 1996 F150 & Larger F-Series Trucks
16
May 10, 2016 12:21 PM
Clemzeter
1999 - 2003 7.3L Power Stroke Diesel
6
Dec 10, 2004 11:06 AM
