swapping cylinder heads

Reply Subscribe

Thread Tools

Search this Thread

Jun 6, 2006 | 12:25 AM

klopez

Thread Starter

New User

Joined: Jun 2006

Posts: 3

Likes: 0

swapping cylinder heads

I have a 351m/400 and I was wondering what heads could be swapped without any maching.

Last edited by Torque1st; Jun 6, 2006 at 04:17 AM.

Jun 6, 2006 | 04:18 AM

Torque1st

Posting Legend

Joined: Sep 2001

Posts: 30,255

Likes: 37

Hello- Welcome to FTE! Check out the list of tech forums we have on FTE. There is a wealth of information and expertise here to help you. There are a number of links in my sig below to help you also. Have fun!

You already have good heads. What are you doing with the engine?

Jun 6, 2006 | 12:07 PM

klopez

Thread Starter

New User

Joined: Jun 2006

Posts: 3

Likes: 0

they are both cracked.

Jun 6, 2006 | 01:57 PM

fomocofan

Senior User

Joined: Oct 2004

Posts: 420

Likes: 0

Any 351C/M or 400 heads will interchange...But of course machine work as in milling is always a good idea...and of course checking for clearnce and CR etc..
But I would stick with stock 351C/M 400 2V heads for torque and street use.

Jun 6, 2006 | 02:24 PM

klopez

Thread Starter

New User

Joined: Jun 2006

Posts: 3

Likes: 0

thanks for the help. I thought that I could put 351c heads but i wasn't positive. I will try to find 351m/400 heads to put back on it, but if i cant i know where i can get the 351c