Can anyone tell me how much the stock air filter assembly system on my F350 costs?....I just replaced it with an open element....and I wouldn't mine trying my luck at e-bay so I can get some $$ back.....Or.....is anyone here interested?

Yukonsly

 

ahhh, not likely.

 

yea... u could try ebay... might get $5.... there not worth much because everyone that knows anything about pref dumps the stock and goes open air... sorry. Mine just went into the plastic recycling area at the dump...

-Robb

 

I would put it on ebay without a reserve - whatever you get will be more than the dump will give you. BTW, I have one in my tool shed if you want a second to match - even has the updated steel fasteners in the lid. It has been resting comfortably there since August 7 of 2001.

Dave / Believer45

 

Yukonsky,

What type of intake did you install?

My stock lid is cracked, and I am shopping around for other types of intake systems.

Wes

 

Try Tymar its a very good open element system.

 

I will buy it if it is complete and not broken. It depends on what year the truck is, I need one for a 1995-1997 Powerstroke.

I need to replace the one that I have that is broke and I am selling the truck, so it needs to be replaced.

PLEASE GET BACK TO ME!

 

F350john,

I don't mean to hijack.. but if he doesnt get back to you I have one that could be yours for the price of shipping..

Thanks,
Pat

 

me too... w/ 2 K&N's that are only about a year old.

 

Ok Pat, who ever wants theirs gone the fastest, All that I care about is that it has NO cracks, chips, or missing parts, I would like the bottom tub, the lid, the little black front extender piece, and the rubber tube if its still good or no longer needed.

I am putting this on a truck I am selling anyways, so it must be in nice condition for the next guy.

Thanks,
John

 

F350john,

I will bow out.. All I have is the bottom tub, lid and metal hold down bolts.. I did the DIY tymar and used the rubber hose and the plastic scoop..

Thanks,
Pat