vin decode? and other stuff
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
I'm sorry, I cannot help you except for the info I've already typed in posts #13 & 15. You have to contact Ford Motor Co. in Dearborn Michigan and whoever the Motor Home was made by to get the info you need.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
I called FoMoCo this AM. The lady I spoke with said you can contact the Ford Motor Co. Customer Relations Center in Italy for assistance with your US vehicle.
The number is: 39 06 91806 900. She also gave me two websites: fordowners.com & motorcraft.com.
She also said that Ford will provide you with a copy of your Econoline's original build sheet.
The number is: 39 06 91806 900. She also gave me two websites: fordowners.com & motorcraft.com.
She also said that Ford will provide you with a copy of your Econoline's original build sheet.
New User
Joined: Nov 2010
Posts: 12
Likes: 0
Good morning,
I called the Customer Relations Center in Italy
it gave me the landlady response: This vehicle is American, you have to contact the constructor in america .
I have given our toll free number: 8003923673
I tried to visit the two websites, but I have not figured out where I do the REQUEST.
grazie.
I called the Customer Relations Center in Italy
it gave me the landlady response: This vehicle is American, you have to contact the constructor in america .
I have given our toll free number: 8003923673
I tried to visit the two websites, but I have not figured out where I do the REQUEST.
grazie.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
Ford has no other phone number for Customer Relations in the US, other than the 800 number.
I know, because I asked. Ford furnished the two websites I listed.
Call back, ask for the manager of the Customer Relation Center in Italy.
The lady I spoke with in Michigan...stated...info on US vehicles can be obtained from Italy.
I suppose, if everything fails, I could call Ford, furnish the VIN, then ask them to mail the build sheet to you.
The problem with a FAX is, it's a facsimile, which your gov't may not accept as they may want the original.
I sent you an email, send me a return email with the VIN and your address on it. I'll take it from there.
I know, because I asked. Ford furnished the two websites I listed.
Call back, ask for the manager of the Customer Relation Center in Italy.
The lady I spoke with in Michigan...stated...info on US vehicles can be obtained from Italy.
I suppose, if everything fails, I could call Ford, furnish the VIN, then ask them to mail the build sheet to you.
The problem with a FAX is, it's a facsimile, which your gov't may not accept as they may want the original.
I sent you an email, send me a return email with the VIN and your address on it. I'll take it from there.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
You need the original build sheet. The Econoline is registered by the VIN (Vehicle Identification Number), which will be the same if the Econoline was located in Timbuktu, Outer Mongolia...or on Mars!
Ford goes by the VIN, so there shouldn't be any problemo getting the info from Italy.
It's simple...All the pinhead has to do, is....type the VIN into Ford's computer system, and VOILA! All the info comes up on the computer's screen.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
I sent you an email, telling you to look at the info I typed in this thread after I called Ford.
I just sent another.
No speaka Italian, so for all I know, you could be telling me where to go, and I wouldn't have a clue!
I just sent another.
No speaka Italian, so for all I know, you could be telling me where to go, and I wouldn't have a clue!
New User
Joined: Nov 2010
Posts: 12
Likes: 0
MIO EMAIL è : mezzalunam.2008@yahoo.it
Address: ramdani nora
via cavour 23
altavilla vicentina
36077 vicenza
italia
Address: ramdani nora
via cavour 23
altavilla vicentina
36077 vicenza
italia
New User
Joined: Nov 2010
Posts: 12
Likes: 0
https://www.ford-trucks.com/forums/s...&userid=368968
I HAVE NOT BEEN ABLE TO READ THIS EMAIL. DO NOT OPEN
THIS MESSAGE IS OUT:
HILALE2010, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
POSTPONED TO YOU MY EMAIL
THANK YOU, and I apologize for the inconvenience
I HAVE NOT BEEN ABLE TO READ THIS EMAIL. DO NOT OPEN
THIS MESSAGE IS OUT:
HILALE2010, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
POSTPONED TO YOU MY EMAIL
THANK YOU, and I apologize for the inconvenience