When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I tried the ole, needle readjust but I can't seem to get it to move. The fan pattern is fine on the drivers side, but on the passenger side it barely makes it up the windshield.
Your nozzles may not be spraying properly due to dirt in the orfice. Open your hood and under each nozzle, twist and pull off the hose and try to backflush the nozzle with air or mabey with water.
Your nozzles may not be spraying properly due to dirt in the orfice. Open your hood and under each nozzle, twist and pull off the hose and try to backflush the nozzle with air or mabey with water.
Cool.... I'll try that. It was a left over and sat on the lot, so maybe this is what's happening.