distributer gear
Thread Starter
|
Senior User
Joined: Jul 2005
Posts: 253
Likes: 0
From: REARDAN WA
distributer gear
How much play should be in the distributer gear. I can move my rotor about an 1/8 of an inch. I used my old distibuter out of my 93 and put it in my 94 factory roller... Did I need to change the gear for the roller cam.
Thread Starter
|
Senior User
Joined: Jul 2005
Posts: 253
Likes: 0
From: REARDAN WA
well then I guess I just might have found the problem with my truck. Sometimes it runs great and others not so great. Replaced cap rotor and wires and the problem was gone. Two days later and its back, and ity does seem like a timing issue. When it was running good the timing showed 14 deg and when its bad it bounces between 8 and 14 along with idle fluctuation. So maybe that will solve my problem...thanks
Thread
Thread Starter
Forum
Replies
Last Post
Outlaw56
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
12
Apr 24, 2014 10:06 PM
brett_d
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Dec 8, 2005 10:19 AM
jasonw302
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
6
Apr 12, 2005 07:23 PM
