Parts Needed
Senior User
Joined: Jul 2001
Posts: 432
Likes: 1
From: West London, England
Originally Posted by Fosselrodder
Hi Steve What have you got a Pickup? Fosselrodder
And unless there is more than one rodshop in Harlow I think I have spent some cash with you over the last few years
Steve
Thread Starter
|
New User
Joined: Aug 2005
Posts: 9
Likes: 0
From: OLD HARLOW, Essex, UK
To be honest I dought if there is a market anyware, but I thought of running say five sets just to help bloke who do not have a set. I recon that they would lazer cut well & five setts would pay for the design & tooling. The double stop 90* & 180* is like the ones I have seen over here.
Originally Posted by AXracer
I can take drawings off my sliders, but I wouldn't suggest marketing them at least not here, I don't know if the design is original or copyrighted aftermarket since they are chromed. They have two stop positions: approx. 90* and 180* to the body opening.
Thread Starter
|
New User
Joined: Aug 2005
Posts: 9
Likes: 0
From: OLD HARLOW, Essex, UK
Hi Steve I expect you did, to my knowledge there is only the one, yes I like the panel, always have since my Jago days when we rescued a very rotten on from a local scrappy so that it would not be crushed.
Originally Posted by Steve_B
Yes just a plain old 54 pickup, nothing as exotic as a panel
And unless there is more than one rodshop in Harlow I think I have spent some cash with you over the last few years
Steve
And unless there is more than one rodshop in Harlow I think I have spent some cash with you over the last few years
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Towmanjbo
Clutch, Transmission, Differential, Axle & Transfer Case
2
Jul 12, 2010 07:37 PM
