Hey guys,
Does anyone have any pics of the Edelbrock's 351w truck intake/plenum (upper and lower) preferably the passenger side where the EGR tube mounts to the lower intake.
The reason I'm asking is because I own a 1991 Ford F-250 w/ a EFI 302 and Edelbrock truck intake (part # 3841 upper and lower) and performer 6037 heads. I am currently in the middle of swapping my engine to a EFI 351 W.
My question is....can I purchase the Edelbrock lower intake manifold (part # 3884 base only) and will it bolt up to my current Edelbrock truck plenum (upper intake) w/ no modifications? Or do I have to purchase the truck intake as a set for the 351 W (part # 3881 upper and lower intake set)?

Thanks,
J.D.

 

I think the ports and bolt pattern match, but let someone else verify that. The EGR on the 351 feeds from the passenger side header instead of a crossover in the manifold like the 302 has.

 

Thanks! I just want to check before I spend $300 on the lower intake manifold.

 

You can look in my gallery at my 351 eddy intake, but you can call edelbrock's tech line (# from their website) and ask them directly.

I asked about a water pump and they handled my questions well.

 

the 5.8 edelbrock lower will bolt up to an edelbrock 5.0 truck upper. they are the same .

 

I hope you can get just get the lower half....when I ordered mine it was pn 3881 and that was for both, $525.