someone with desktop dyno
Thread Starter
|
New User
Joined: Mar 2005
Posts: 24
Likes: 0
someone with desktop dyno
hello can anybody with desktop dyno please run my combination it would help me out alot
what i have is
400 bored 30 over
edelbrock intake perfermer 2171
edelbrock 1406 carb
comp cam 268h specs are adv.dur. dur.050 lift lobe sep
int/exh int/exh
268/268 218/218 494/494 110
the pistons are just standard that 30 over i am not quite sure about the compression but it it is probably about 8 to 1 or 8.5 to one.it hass a comp cam timing chain also if someone could please run this and tell me the results i would be very greatful c6 tranny
what i have is
400 bored 30 over
edelbrock intake perfermer 2171
edelbrock 1406 carb
comp cam 268h specs are adv.dur. dur.050 lift lobe sep
int/exh int/exh
268/268 218/218 494/494 110
the pistons are just standard that 30 over i am not quite sure about the compression but it it is probably about 8 to 1 or 8.5 to one.it hass a comp cam timing chain also if someone could please run this and tell me the results i would be very greatful c6 tranny
Senior User
Joined: Jan 2004
Posts: 299
Likes: 0
From: Illinois
I got 223hp at 3500 rpm's and 358 ftlbs at 3000 rpm's this is run with exhaust manifolds. If you added headers you would get about 25 more hp.
Sanders
Sanders
Last edited by Sanders; Mar 20, 2005 at 08:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NIdude
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
Apr 14, 2015 10:25 PM
MIKES 68 F100
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
Mar 27, 2013 09:06 AM
Boss50
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
6
Mar 17, 2013 09:51 PM
chrisjr2287
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
12
Mar 13, 2005 11:26 AM
