boost gauge hook up
Thread Starter
|
Senior User
Joined: Sep 2003
Posts: 230
Likes: 0
From: CO.
boost gauge hook up
Where do I tee in under the hood for the boost gauge. The '05 6.0 have a boost gauge in the dash, but I have a gauge that reads higher. I am unsure where to hook it up. Pictures are worth a 1000 words.
P.S. I looked in the stickies and in the tech folders. I think the Gauge installs should be in the stickies or the tech folder. Thanks
P.S. I looked in the stickies and in the tech folders. I think the Gauge installs should be in the stickies or the tech folder. Thanks
Senior User
Joined: Aug 2003
Posts: 248
Likes: 0
Really nice pictures of A-pillar installation (including the senders and the boost T) can be found at
http://www.dieselmanor.com/diy/PSD3-...D3gauge-p2.htm
http://www.dieselmanor.com/diy/PSD3-...D3gauge-p2.htm
Senior User
Joined: Mar 2004
Posts: 172
Likes: 0
From: fresno, oh
if you drill and tap in your intake elbow it will give you the best possible reading because that is right before it goes into the engine...make sure you take it off first and that when you are done there is no shavings or anything in the when you put it back on...thats where i did mine at and it works well...if your dealer gives you any hassle about having a gauge in there the elbow is only li 30 dollars anyway so you can just get a new one if it is going to be ther difference between them paying and you paying...just a thought
Thread
Thread Starter
Forum
Replies
Last Post
