Cab Corner Repair

Reply Subscribe

Thread Tools

Search this Thread

Dec 16, 2004 | 11:06 PM

rlangs58

Thread Starter

Freshman User

Joined: Aug 2004

Posts: 36

Likes: 0

From: Wichita, Kansas

Cab Corner Repair

Anyone have any experiance with installing an outside cab corner repair
panel??? I had a link that was supposed to take me to Fred Mcgee007's
Articule about same but either it & he are gone or the search engine has slipped a gear or two as I can't find anything about it & I'm ready to do the one on the right side of my 84 F-150 SB/SS.

Thanks for any help.

rlangs58

Dec 17, 2004 | 12:02 PM

Steve_B

Senior User

Joined: Jul 2001

Posts: 432

Likes: 1

From: West London, England

I did all 4 corners on my 54
I am new to this bodywork thing and it turned out OK
If you can weld it wont be too hard

Some pics in my gallery may give you some ideas

Stephen

Dec 17, 2004 | 01:44 PM

Aekisu

Elder User

Joined: Mar 2003

Posts: 999

Likes: 1

From: Willamette Valley Oregon

<cr>
Stephen
An impressive piece of work. It's being done right and not cobbled together. I see you learned the same way I did. Community colleges can be a God sent, can't they?
Dennis

Dec 17, 2004 | 10:29 PM

1982fordf100

Elder User

Joined: Sep 2003

Posts: 926

Likes: 3

From: SE, Michigan

Quote:

Originally Posted by rlangs58

I sent a link to you that had the pictures from my gallery. I never wrote an article about it I just had a description above each picture showing what I was doing at that time. They arn't that hard to put on just have to measure once, twice and three times before cutting. And cut a small amount at a time. Here's the link again to my gallery. Just trying to help anyone else out that might be doing work on their truck.

https://www.ford-trucks.com/user_gal...&albumid=12758

Dec 18, 2004 | 10:03 AM

Steve_B

Senior User

Joined: Jul 2001

Posts: 432

Likes: 1

From: West London, England

Thanks Dennis

The best thing I did was finding that course at the college
The guys who run the course are real pro's and there's no substitute for experience

The next best thing was finding this website